Hammer Voltage Fix

Here you go guys, if this doesn’t fix your voltage drop check out the contact on your button as well. But this did the Trick for me , if you are having any other issues be sure to let me know so I can look into it and find another fix for you. Thanks all for the support.

Kracken Oil Taste!!! FIX

THE KRACKEN MACHINE OIL TASTE FIX

Alright so you got a kracken clone and every build you put it taste like machine oil, so you wash the heck out of it, You soak it in milk, you rub it down with rubbing alcholo, you poor your favorite whiskey all over it and still the dam thing taste like machine oil. Well i found where it is coming from, remove the center post, positive just tap it out, gently as not to damge the threads of course the screw on the top needs to be replace too. once you getthe post out, with the screw out of it the oil is down in that hole, and due to the size of that hole. its realy hard to flush it out. So the solution, burn the crap out of it, Besure to not face the opening toward ya since by experience hot oil realy sucks when it pops. You will see the nasty machine oil begin to burn off, let the post cool down and repeat again. keep going till no more smoke is present letting you know that the machine oil is burned off. Next put the post and rest of the components in a cup with some plain ol vodka. let it soak for about an hour reasemble , rebuild your coil or coils and enjoy, besure as a final note to remove the o rings and clean them in the process aswell. So this is my fix for that nasty taste we are all getting